Sink with faucet 10” x 9”
Bath 10” x 9”
Hot plate 8” x 11”
Solvent storage on top, 12” x 27”
Solvent tank 1 - 7” x 12”
Solvent tank 2 – 10” x 12”
Solvent tank 3 – 4” x 12”
Built in timer
Bubbler model 200 ASP controller
Hot plate controller and timer
Ultrasonic controller
EPO controller, built in model 100 EPO
Bottom drawer storage for chemicals and supplies qty 2
Excellent condition, like new, used only in lab environment
Price = 15,000.00

This wet bench came from HP Labs here in California, low usage, excellent known working condition

Large sink with faucet 12” x 26.5”
Acid bath 10” x 9”
Holding tank 15” x 12”
Work surface area 14” x 30”
EPO controller, built in model 100 EPO
Spin Coater Module WS-400A-6Npp/LITE/IND
With Laurell Technology Corp controller
DI bubble controller
Holding tank alarm monitor controller
Hot plate timer
Hot plate stirrer and temp controller
Built in timer
Bottom drawer storage for chemicals and supplies qty 2
Excellent condition, like new, used only in lab environment
Model = 1222-327 19/21
Serial = 041691126
Vintage = 2003
Price = 18,500.00

This wet bench came from HP Labs here in California, low usage, excellent known working condition

Glove Washers, Qty 2 Automated

Constructed of Polypro
Proximity switch, senses when hand is placed inside and turns on DI water spray automatically
DI water dilutes any residual chemical
Cabinet has DI water supply port and Drain port
Storage compartment on bottom
Glove drain/dry area on top, place to rest gloves to air dry before going into waste
Pricing 1,200.00 each (Qty 2)

These 2 glove washers came from Beam Reach Solar here in California, good condition, used to clean gloves before putting into waste – also can clean while engineers are still working to keep contamination to a minimum

Wafer Process Solvent Bench

JST Hot Nitrogen Dryers, Automated PLC Specs:

Constructed of SST
Chamber Dimensions = 19” x 13” x 14”
Automated PLC control
Pricing = 8,000.00

These 2 JST hot N2 dryers came from the Solar company called Transphorm, as part of the Micron fab

JST Solvent Ultrasonic Bench

JST Hot Nitrogen Dryers, Automated PLC

Ultrasonic bath  with PLC control 12” x 12”
Hot plate with PLC control 8” x 8” (plate) tank larger
Large sink with faucet 16” x 12”
Model = ST0142A0
Serial = 17798-001-00
Vintage = 2010
Price = 11,000.00


This wet bench came from HP Labs here in California, low usage, excellent known working condition

Amerimade Acid Bench

Sink with faucet 10’ x 10” x 8”
DI left rinse overflow bath 6” x 7.5” (overall is 10”) x 9” deep
Ambient ultrasonic bath 8” x 8” x 10”
Ambient Static bath 8” x 8” x 10”
QDR (Quick Dump Rinse) 8” x 8” x 8”
DI rinse bath 10” x 10”
Koh bath, heated, and with recirculation pump 10” x 10”x 9”
DI right rinse overflow bath 4” x 10” (overall is 12”) x 9” deep
Voltage 208vac, 3 phase, 18 amp, 60hz
DI Spray Gun, x1
N2 Spray Gun, x1
Model = STA00142
Serial = 140160001
Vintage = 2002
Price = 17,500.00

This wet bench came from HP Labs here in California, low usage, excellent known working condition

 

​WAFAB Wet Sink

·         8‘ X 44” deep X 6 ‘ Tall Frame (Stainless Steel Construction).
·         X4 Quadrants (A-B-C-D)
·         A: Left 22” (BLANK)
·         B: Left center 25” includes:

o   x2 DI guns 4”x7”
o   Quick Dump Rinse 8”X8” (with UFT-48-8 Quick Dump Controller)
o   10” X 12” Thermolyne Hot plate (max 200 degrees) explosion proof.
·         C: Right center 21” includes:

o   18” X 17” work area with 12” X 10” Ultra Sonic tank with UFT Ultra Sonic Timer.
·         D-Right 25” includes:

o   4” X 7” DI guns (x2).

o   12” x 12” DI water faucet - tank

o   4”X4” waste drain

o   Qty 2 15” X 5” separate “ solvent storage” areas
·         Upper Control Panel:

o   Three red alarm indictors for: LOW Exhaust, LOW Purge, Plenum Level (high)

o   Quick Dump Rinse Controller UFT-48-8

o   Hot Plate Timer (Potter Brumfield)

o   UFT Digital Timer Module

Front Lower Storage Area:

Qty 2 31.5” X 32” with Six Position Storage slots, (on wheels)

Price = 12,500.00

This wet bench came from HP Labs here in California, low usage, excellent known working condition

Labconco & SST Sink


Fume hood overall dimensions = 70” x 25” x 48” tall
SST table overall dimensions = 74” x 30” x 36” tall
Together they are 84” tall total
Fume hood inside dimensions = 66” x 20” x 30” tall
SST sink dimensions = 18” x 17-3/4” x 12” deep
Built in exhaust motor with on/off switch
Exhaust gauge on the side of the fume hood
Average Face Velocity = 122 ft/min
Minimum Velocity = 107 ft/min
Total CFM = 543 ft3/min
Built in light fixture with 0n/off switch
Pass through port capable (currently plugged) can add CDA, DI Water, N2, etc…
Used prior for Acetone, Isopropyl Alcohol, and Dynasolve chemicals / solvents
Model = 2246700
Serial = 061264335G
Vintage = 2012
Price = 7,500.00

This Fume Hood and SST Table came from Bridgelux here in California, excellent like new condition, company was purchased and closed

Solvent/Acid Hoods

Overall dimensions:  36” W, 36” D, 76” T. 
Work surface: 20” W, 20” D.  Sink: 8” W, 14” L, 12” D
N2 and DI guns, with faucet
Dual doors in the front, for access as well as storage.
Can be plumbed to go to facilities AWN, or can be used with portable waste collection tank
Exhaust fume hood, with magnahelic meter, has wheels and leveling feet
Price = 7,500.00

This wet sink came from Bridgelux here in California, excellent like new condition, company was purchased and closed

Wafer Process Acid Bench

JST Solvent Bench Koh

Ultra Fab Solvent Bench

Large sink with faucet 16” x 16”
Holding tank 9.5” x 5.5” (decap)
Large work surface area 32” x 17” (additional area behind holding tank)
Bottom chemical storage area on wheel to pull out from the front
Excellent condition, well taken care of, came from Intersil in 2013
Model = UTY-5FT-FRPP
Serial = A00198
Vintage = 2000
Price = 7500.00

This wet bench came from Intersil here in California, low usage, excellent known working condition